Range of PYE Products
BACK           
 
PYE FIL (G.F 621)
 

PYE FIL (G.F 621)

Spray Plaster Grey Finish
Product Code : PLGF
Colour : Grey
Packaging : 25 kg
Cov.(app.) : 1 kg / m² / mm
Document : MSDS
  Data Sheet
 
 
A polymer modified cement base grey finish coat skim coat, specially designed to provide high quality smooth surface finish, with a single application thickness of 1-2 mm. Suitable for either painting, wall papering or simply as a finish surface.
  • To be used on concrete / cement panel, aerated light weight block or skim plastered surfaces.
  • Ceramic tiles or natural stones can be fixed on PYE FIL finished surface.

Ensure surfaces must be clean, free of dust, oil, paint, grease and all traces of mould. Surface defects deeper than 4mm shall be patched/ repaired with cement renders or PYE FIL base plasters prior to the application. Prewetting is recommended for dry surfaces, but over wetting resulting in accumulation of water on the surface should be avoided.

Mixing
Add about 11 - 12 litres of water to 25kg of PYE FIL and mix with a power drill whisk or a suitable mechanical stirrer for 10 minutes to obtain a homogeneous creamy paste. Re-mix for 1 minute if the material is left undisturbed for more than 30 minutes.

Application
Apply by using a spray plaster machine or directly with a steel trowel or spatula. Level out to a thickness of 1 - 2mm to obtain correct level or alignment. Allow the material to gain partial surface drying before returning to work on surface with a steel trowel to achieve a smooth finish. When applying several layers, the base layer must be dry before spreading the subsequent layer.

Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.

Technical Information

Colour GF 621-Grey
Recommended 1 - 2mm thickness
Form Powder
Pull out test As per test report enclosed.
Coverage 1kg/mm/m2
Pot life 2 - 3 hours
Yield Approx. 11 - 12 litres of water per 25kg bag.
Fire hazard Does not spread/ support fire.

 

Shelf Life
6 months if stored in a cool and dry condition.

Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.