Fillers

Formulated using special selected fillers that is hard and suitable for interior and exterior repairs use and it adheres strongly to cement plaster and concrete surfaces.

• Can be used in interior and exterior ready-mixed grey colour quick drying filler with strong adhesion, hardness and minimal shrinkage.
• Used for patching 5-15 mm cracks, holes and surface defects.
• Suitable for cement plaster and concrete substrates.

Ensure that the surface of cracks is clean, dry and free from dirt, grease and loose materials.

Cracks or Crazing
Apply PYE L-CRACK FILLA using scraper to fill in the wide crack hole and remove any excess filler. Slightly overfill the area and allow it to dry before sanding. Before painting, make sure to clean with a damp cloth after sanding to remove loose particles.

Deep Cracks or Holes
Apply multiple coats of PYE L-CRACK FILLA for crack or hole between 10 - 15mm wide or depth with a maximum 7mm per coats, and allow 2 - 3 hours to dry between each coat before patching the next coat.

Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.

Technical Information

Adhesion	Adheres firmly to most clean, dry and grease free concrete surfaces.
Colour	Greyish white
Sandability	Formulated for easy sanding.
Odour	Odourless on drying.
Specific gravity	1.3g/ml

 

Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.